Differences

This shows you the differences between two versions of the page.

--- k8s:distributions:rke2 [2023/02/20 22:46] – external edit 127.0.0.1
+++ k8s:distributions:rke2 [2023/11/11 18:21] (current) – admin
@@ Line 16: / Line 16: @@
 Create a `/etc/rancher/rke2/config.yaml` which will look something like:
 ```yaml
-node-name: acdh-cluster3
+node-name: leap-micro6
 node-external-ip:
   - 10.3.6.55
@@ Line 28: / Line 28: @@
 # on all other servers after the initial setup on 10.6.16.61 is completed
 server: https://10.6.16.61:9345
-[...]
+cluster-cidr: 10.42.0.0/16
+service-cidr: 10.43.0.0/16
+cni: calico
+disable-kube-proxy: false
+etcd-expose-metrics: false
+etcd-snapshot-retention: 5
+etcd-snapshot-schedule-cron: 0 */5 * * *
+kube-controller-manager-arg:
+  - cert-dir=/var/lib/rancher/rke2/server/tls/kube-controller-manager
+  - secure-port=10257
+kube-controller-manager-extra-mount:
+  - >-
+    /var/lib/rancher/rke2/server/tls/kube-controller-manager:/var/lib/rancher/rke2/server/tls/kube-controller-manager
+kube-scheduler-arg:
+  - cert-dir=/var/lib/rancher/rke2/server/tls/kube-scheduler
+  - secure-port=10259
+kube-scheduler-extra-mount:
+  - >-
+    /var/lib/rancher/rke2/server/tls/kube-scheduler:/var/lib/rancher/rke2/server/tls/kube-scheduler
+kubelet-arg:
+  - max-pods=250
+kubelet-extra-mount:
+  - >-
+    /lib/modules:/lib/modules
+node-label:
+  - cattle.io/os=linux
+protect-kernel-defaults: false
+```
+Create a `/etc/rancher/rke2/registries.yaml` for using a local docker.io mirrir which will look something like:
+```yaml
+mirrors:
+  docker.io:
+    endpoint:
+      - "http://10.6.16.58:5000"
 ```
-See Setting Up RKE2 below.
+### Server
+```bash
+export PATH=$PATH:/opt/rke2/bin
+sudo systemctl enable rke2-server.service
+sudo systemctl start rke2-server.service
+sudo journalctl -u rke2-server -f
+```
+### Agent
 ```bash
@@ Line 37: / Line 80: @@
 sudo systemctl start rke2-agent.service
 sudo journalctl -u rke2-agent -f
+```
+## (Re)creating local storage provisioner volumes
+As any service using local storage should implement restroing missing data themselves this describes how to create just the empty volumes/disks to do that.
+As the local storage provisioner can not change the size of the volumes it will select the next larger volume for any claim. For example a 20 GB claim will select a 29.4 GiB volume, a 30 GB claim a 30.2 GiB volume etc.
+For flatcar-linux we can follow the advice on the sig-storage-local-static-provisioner website: Mount formatted block storage on `/mnt/local-disks/<UUID>`. The UUID will be used to make sure mixing block devices will fail and not expose data to the wrong host.
+* Create a block device for an acdh-clusterX node in vCenter. Note that the size of the block device should be a little larger than the desired even number if GiB (example: for a 20 GiB volume create a 21 GiB disk) as there is a difference in how disk size is calculated
+* Format the volume on the respective flatcar node. Use ext4 or xfs depending on the needs of the service (for example elasticsearch/opensearch recommeds ext4)
+```bash
+sudo mkfs.ext4 /dev/sdd
+```
+* reserved blocks for root are not very useful in kubernetes so set them to 0
+```bash
+sudo tune2fs -r 0 /dev/disk/by-uuid/<UUID>
+```
+* Get the UUID. It is part of the output of `mkfs.ext4` above. It is also for example available using using `ls -l /dev/disk/by-uuid/*`
+* Create a mount unit to mount the filesystem. The filename needs to match the mount point and is encoded.
+  This will automatically create a `<UUID>` directory in `/mnt/local-disks/`
+```bash
+sudo cp /etc/systemd/system/var-lib-rancher.mount "/etc/systemd/system/$(systemd-escape --path /mnt/local-disks/<UUID>).mount"
+sudo vi /etc/systemd/system/"$(systemd-escape --path /mnt/local-disks/<UUID>).mount"
+# change directory name and device name
+# [Unit]
+# Description=Mount local storage at /mnt/local-disks/<UUID>
+# Before=local-fs.target
+# [Mount]
+# What=/dev/disk/by-uuid/<UUID>
+# Where=/mnt/local-disks/<UUID>
+# Type=ext4 or xfs
+# [Install]
+# WantedBy=local-fs.target
+sudo systemctl daemon-reload
+sudo systemctl enable "$(systemd-escape --path /mnt/local-disks/<UUID>).mount"
+```
+## Updating RKE2
+This is best done using the Rancher UI for cluster updates. If the version there and the version on the nodes get out of sync _also all other settings cannot be changed anymore!_.
+But for reference here is the very simple method of following the stable release channel for RKE2:
+```bash
+curl -sfL https://get.rke2.io | INSTALL_RKE2_CHANNEL=stable sudo -E sh -
+sudo systemctl restart rke2-agent
+# or
+sudo systemctl restart rke2-server
+```
+Repeat on each node after the last one is showing as up and active in Rancher.
+Start with the management/`server` nodes then update the `agent` nodes.
+[Here](https://update.rke2.io/v1-release/channels) you can see what version corresponds to stable at the moment.
+Kubernetes major versions are also channels. The channel latest refers to the very latest releases of K8s available.
+## Troubleshooting
+### Using command line tools to manually delete container images images
+```bash
+sudo -s
+# as root
+export PATH=$PATH:/var/lib/rancher/rke2/bin
+export CONTAINERD_ADDRESS=/run/k3s/containerd/containerd.sock
+ctr -n k8s.io i rm $(ctr -n k8s.io i ls -q | grep <image name to delete, regex>)
+# or
+export CONTAINER_RUNTIME_ENDPOINT=unix:///run/k3s/containerd/containerd.sock
+crictl images
+crictl rmi <image name to delete>
 ```